OMTech
Slate signs & plaques on a OMTech
Yes: the K40, Polar, 60–100 W CO2 can make slate signs & plaques. Slate engraves bright white with no finishing. House numbers, memorials, cheese boards.
Typical Etsy price$22
Middle half of prices$18–$42
Material per piece~$7
Machine time per piece18 min
Physical listings sampled53
Top results that are digital files3 / 56

Which OMTech models can laser engrave it
| Model | Can it? | Notes |
|---|---|---|
| K40 40 W CO2, about 300 × 200 mm | Yes | good fit |
| Polar 50 W desktop CO2 | Yes | good fit |
| 60–100 W CO2 large-format CO2 beds | Yes | good fit |
| Fiber (20–50 W) metal marking | Engrave only | fiber marks metal best; limited on wood |
Tips for OMTech owners
- Needs: no special hardware: any diode or CO2 laser works.
- Material cost about $7 per piece, about 18 min of machine time.
- Best results: Natural slate blanks; engrave at low power. Seal with mineral oil for a dark finish.
OMTech sells budget-friendly CO2 lasers from the K40 up to large-format 100 W machines, plus fiber lasers for metal. Popular with Etsy sellers who want a big bed for signs. All OMTech ideas.
Specs are approximate public figures; check the OMTech site before buying.
Other machines:



