xTool
Coasters (wood, slate, cork) on a xTool
Yes: the F1, F1 Ultra, S1, M1 Ultra, P2S can make coasters (wood, slate, cork). Sell in sets of 4. Slate looks premium, cork and wood are cheap.
Typical Etsy price$10
Middle half of prices$3.94–$26
Material per piece~$6
Machine time per piece18 min
Physical listings sampled19
Top results that are digital files39 / 58

Which xTool models can laser engrave it
| Model | Can it? | Notes |
|---|---|---|
| F1 galvo, about 115 × 115 mm | Yes | good fit |
| F1 Ultra galvo, about 220 × 220 mm | Yes | good fit |
| S1 enclosed, about 498 × 319 mm | Yes | good fit |
| M1 Ultra 4-in-1 craft machine | Yes | good fit |
| P2S 55 W CO2, about 600 × 308 mm | Yes | good fit |
Tips for xTool owners
- Needs: no special hardware: any diode or CO2 laser works.
- Material cost about $6 per piece, about 18 min of machine time.
- Best results: Slate engraves white; wood and cork engrave dark. Seal wood with a clear coat.
xTool is the fastest-growing laser brand in the US: its IPO filing reports 405,000+ connected devices and more than half of revenue from the US. The F1 galvo is the go-to for fast small-batch engraving, the P2S for CO2 cutting. All xTool ideas.
Specs are approximate public figures; check the xTool site before buying.
Other machines:



